Paver Sealing – 7 Steps To Build Your Own Garden Paving

Using paver sealing or paving your garden can be done in many different ways. In addition, the right garden paver sealing can make your garden look bigger! Fortunately, installing garden paving yourself is not a complicated job. Laying the paving yourself ensures that you can make your garden exactly the way you want it.

In this article, we will show you step by step how you can lay your garden paving.

Laying garden paving yourself: the step-by-step plan

The paver sealing in your garden largely determines its atmosphere. If you opt for straight lines, your garden will radiate a different atmosphere than if you opt for round shapes.

Installing garden paving yourself does not have to be complicated, provided you start with a good plan. To help you on your way with the construction of your garden paving, we have listed the most important steps for you.

Now you can finally lay that beautiful garden paving yourself that you have wanted for so long!

Step 1: Choosing the paver sealing or the type of tile

Before you start laying garden paving, it is good to choose a particular type of tile. Which type you go for depends on the atmosphere that you radiate and the requirements that the tile must meet.

1.      Concrete tiles

Concrete tiles are generally a good option if you are going to pave your garden yourself. This is because concrete can be produced cheaply. The advantage of using concrete tiles is that they are resistant to knocks and last for years.

The disadvantage is that discoloration can occur in the tile after several years. Fortunately, by using vinegar and sand (for sanding), you can keep the color for as long as possible.

Nowadays, the use of concrete tiles is even preferred. This is due to the emergence of the industrial look in which concrete should not be missing. Have you already succumbed to this look inside? With concrete tiles, you can also quickly bring the look to your garden!

2.      Natural stone garden tiles

If you go for a slightly more luxurious look in the garden, you can opt for the use of natural stone. Natural stone is priced a bit higher than concrete but has a good quality and a long lifespan. The appearance of natural stone is also a bit warmer and more luxurious.

Well-known types of natural stone that are suitable for garden paving are granite, gneiss and quartzite. Be careful when using marble, sandstone, slate and limestone for your garden pavement. Not every type of this can withstand your climate well. Therefore, always be well informed when purchasing.

3.      Baked garden tiles

A popular garden tile is, of course, the clinker. The advantage of these and other baked tiles is that they are often small in size. This makes them highly suitable for creating different motifs. Baked garden tiles also bring warmth and nostalgia.

Baked garden tiles last a long time but can be damaged over the years. It is striking that these damages provide nostalgia and can be decisive for the choice of baked tiles.

4.      Wooden tiles

If you want to go for a completely different look, you can also choose to use wood. Wooden garden paver sealing can be in the form of tiles, but it is more often used in the form of wooden decking.

Step 2: It is time to start measuring

Now that you know which tile you want to use, it is time to measure the garden. This way, you know exactly how many square meters you want to pave, and it is easy to calculate how many tiles you need for this.

The easiest way to measure your garden is to use a surveyor. A surveyor is helpful in measuring long distances. For example, surveyors are for sale at the hardware store with lengths ranging from 10 to 50 meters.

Please note that measuring with a surveyor is not entirely accurate. This means that you will not know the size of your garden accurately to the millimeter. Fortunately, this is also not necessary for laying garden paving. The number of centimeters is sufficient.

Step 3: Sharpen your pencil

When the measurements are clear, you can draw them on paper. Drawing this out is very useful because you can then draw the paving in it to scale. Then you set out the contours of the new garden paving. You do this by putting strips in the ground at the corners and then stretching a rope between them.

Step 4: Prepare the substrate

Laying garden paving yourself starts with preparing the substrate in the right way. If you forget this, you have a good chance that the pavement will become crooked over time.

To start, dig the ground where the pavement will be built to about 6 to 8 inches deep. Then apply a layer of yellow sand to the excavated piece of soil. The choice of yellow sand has to do with the strength of the sand. With yellow sand, you can build a solid foundation to prevent subsidence.

Tip: If you want to prevent weeds from getting through the tiles at a given moment, use a root cloth. Make sure that you put this cloth on the ground before you apply the layer of yellow sand.
Then it is time to smooth out and press the sand. During this process, keep in mind that there must be an ending. A drain ensures that the rainwater from your paving can run into the garden and does not remain on it. For a good outcome, it is wise to maintain a drop of 1 centimeter per meter.

Step 5: The edging

When you have prepared the ground, you are going to place the edging. The edging is the edge that will lie around the pavement. This ensures that the final tiles do not have too much freedom of movement.

Place the edging fence on the edge of the demarcated area for the garden pavement. Hit the tiles you are using for this with a hammer so that the edging sinks slightly into the ground. The final paving will always be slightly higher than the edge closure.

Step 6: Lay the garden paving yourself

The ground has been prepared, and the framework has been laid. At this point, you will lay the garden paving yourself and finish it by taking the tiles. When you’ve placed a tile, tap it with a rubber mallet. That way, you push them just enough into the yellow sand, and they stay firmly in place.

It is easy to lay the tiles from the outside to the inside. This way, you can be sure that you are not left with strange spaces at the edges. Keep a spirit level close at all times to make sure the tiles are straight.

If you have a special shape in your pavement or just can’t get out: remember to lay the entire tiles first. After all, adding small pieces can always be done later. You can neatly create tiles with a tile cutter. Such a tile cutter can be rented at most hardware stores.

Tip: Make sure there is always about 3 millimeters of space between the different tiles. This has to do with the effect of the stone. This can expand or shrink in different weather conditions.

Step 7: Fill cracks with sand

The last step before laying the garden paving yourself is to add joint sand to the whole. Grouting sand is sand that is swept between the cracks of the tiles.

Sprinkle grout sand on the pavement, then sweep it out so that it can settle in between the grout. You repeat this process several times until all joints are properly filled. Then let the sand sit for another week so that it can settle into place.
 

Summary of the steps

Installing garden paver sealing yourself is not difficult, but it requires quite a bit of effort. When laying the pavement, always pay attention to your posture to prevent back pain. Special protectors are available at the hardware store for the knees. You can also put down a mat so that you have more comfort during work.
The steps for laying garden paving are summarized:

  • Choose the type of tile you want to use.
  • Measure the dimensions of your garden.
  • Draw the garden on paper and then place the size of the garden paving in it to scale. Then you set the lines in the garden.
  • Prepare the substrate for paving.
  • Place the edging.
  • Place the garden pavement.
  • Fill the cracks with sand.

When you go for special patterns in the garden paver sealing, make sure you draw these out well in advance. This way, you know for sure that everything fits well, and it is clear how to apply the pattern.

Keep in mind that creating a special pattern takes more time than

when you work with straight tiles. And you can always ask for professional help. If you need it, don’t hesitate to connect with Done Right. Done Right is a team of professionals known for designing contemporary paver driveways all around Florida. They have an impressive portfolio that you can consider to give your imagination a visual representation. To know more about Done Right, visit their website or contact them for a free consultation.

Leave a Reply

Your email address will not be published. Required fields are marked *